Steel Melting Division (SMS)
- Electric melting furnace.
- Capacity – 24000 MT/ Annum.
- Laddle furnace with Argon purging (LF).
- Vacuum degassing.
- Cold wired feeder.
- Bottom pouring ingot casting.
- Overhead double girder crane up to 40 tons.
- Foundry section casting up to 14T single piece.
- Ingot molds from 4“ to 34“ .
- Laddle preheating set up.
- Air pollution control device.
Rolling Mill
- 24“ Automatic mill with 04“ stands.
- 12“ Automatic mill with 06“ stands.
- 18“ Roughing mill
- Billet reheating pusher type furnace- Gas fired.
- Online hot site cutting facility.
- Band saw machine for end cutting.
- Overhead grider cranes
Forging Division
- Open die forging with 06 tons steam hammer.
- Mobile forging manipulator by DDS- GERMANY.
- 02 Oil fired reheating furnace with 06 point temperature control.
- Portable infra-red thermometer RAYTEK , USA.
- Slow cooling pit for better internal soundness.
- Band saw machine( Semi-automatic / Automatic).
- Overhead cranes up to 25 Tons.
Bright Bar Division
- Bar peeling machine up to 100 mm.
- Bar polishing machine up to 100 mm.
- Centerless grinder.
- Cold drawing up to 65mm.
- Round bar straightening machine up to 130 mm.
- Section straightening machine.
- Champering machine.
- Band saw cutting machine ( Semi-automatic/ Automatic)
- GO / NOGO gauges.
- Straightening presses.
Heat Treatment
- Oil & Gas poured annealing furnace from 04 to 60 tons capacity.
- Spherodised annealing furnace up to 20 Tons.
- Quenching & tempering as per API 6A/AMS 2570 with a quench delay of less than 30 secs.
- Normalizing furnace, Bogie type up to 25 Tons capacity.
Machine Shop
- Conventional geared horizontal lathe.
- NC geared lathe.
- CNC horizontal lathe up to 05 mtr.
- Vertical turret lathe.
- Centerless rolls grinder.
- Duplex milling & other milling machines.
- Radial drill.
- Horizontal boring machines.
- Overhead cranes up to 15MT.